مقاله انگليسي در مورد تست غير مخرب NDT همراه با ترجمه 2
An NDT technique for composite structures using visualized Lamb-wave propagation
S. Yashiro , J. Takatsubo and N. Toyama
aGraduate School of Science and Engineering, Ehime University, 3 Bunkyo-cho, Matsuyama, Ehime 790-8577, Japan bResearch Institute of Instrumentation Frontier, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
Received 31 October 2006;
revised 23 March 2007;
accepted 4 April 2007.
Available online 14 April 2007.
Abstract
This study proposes a non-destructive testing ( NDT) technique that visualizes the propagation of ultrasonic waves in solids, including composite laminates. This technique provides a moving diagram of traveling waves through the use of a pulsed laser that scans a test piece. A non-contact scan by the pulsed laser for ultrasound generation with reception at a fixed point enables us to inspect an arbitrarily shaped object and also facilitates easy operation of the measurement system. We applied the proposed technique to the inspection of CFRP laminates and successfully visualized the wave scattering due to impact-induced delamination as well as the propagation of the S0 and A0 Lamb modes. We also addressed disbonding detection in a composite skin-stringer structure and concluded that the reliable detection of damage and the advantages of the proposed technique are applicable to inspections of composite structures
در این وبلاگ